Network General 1T6-510 Exam - Testking

Free 1T6-510 Sample Questions:

Q: 1 A Novell aw?frame contains an 802.3 length field followed by a(n) __________.
A. SNAP header
B. IPX header
C. IP header
D. LLC header
Answer: B

Q: 2 The most common VLAN grouping technique is __________.
A. Protocol
B. Segment
C. Multicast
D. Port
Answer: D

Q: 3 The maximum legal size Ethernet frame (excluding exceptions) as captured by the Sniffer and displayed in a 10/100 Ethernet trace file is:
A. 1518
B. 1512
C. 1532
D. 1514
Answer: D

Q: 4 Which of the following best describes the function of the Transport layer of the OSI Reference Model?
A. Packet framing
B. Reports upper-layer errors
C. Connection management
D. Manages user sessions
Answer: C

Q: 5 The most common type of physical error seen in networks today is:
A. Electrical interference
B. Frame collisions
C. Hardware malfunction
D. Duplex mismatch
Answer: A

Q: 6 In the Sniffer Expert analyzer, the Service Objects relate to which layer of the OSI reference model?
A. Application
B. Presentation
C. Session
D. Transport
Answer: A

Q: 7 Which of the following is a valid filename to use when saving a trace file in the Sniffer with compression applied?
A. Compressed.cap
B. FTP.zip
C. Trace1.enc
D. TCP-error.caz
Answer: D

Q: 8 The frame type that contains a DLC Ethertype field is:
A. Novell aw?frame
B. Ethernet version Two
C. 802.3 frame
D. 802.3 with SNAP
Answer: B

Q: 9 An 802.3 frame contains an 802.3 length field followed by a(n) __________.
A. DLC Ethertype field
B. IP header
C. IPX header
D. LLC header
Answer: D

Q: 10 When physical errors occur they are often interpreted as data in the Sniffer. Key values to look for that may indicate a physical problem are:
A. AAAA
B. 5555
C. FFFF
D. All of the above
Answer: D

Q: 11 What OSI layer handles data encryption?
A. Application
B. Session
C. Presentation
D. Service
Answer: C

Q: 12 Delta time, such as 0.046.357, is read as:
A. hours.minutes.seconds
B. seconds.milliseconds.microseconds
C. milliseconds.microseconds.nanoseconds
D. microseconds.milliseconds.nanoseconds
Answer: B

Q: 13 In the Sniffer Expert analyzer, the Station Objects relate to which layer of the OSI reference model?
A. Session
B. Physical
C. Data Link
D. Network
Answer: D

Q: 14 In the Sniffer Expert analyzer, the Connection Objects relate to which layer of the OSI reference model?
A. Session
B. Transport
C. Network
D. Data Link
Answer: B

Q: 15 The interframe spacing in Fast Ethernet is __________.
A. 9.6 milliseconds
B. 96.0 nanoseconds
C. .96 microseconds
D. .96 milliseconds
Answer: C

Q: 16 A Jabber is a physical error frame that has:
A. A length that is not a multiple of 8 bits, and therefore cannot be unambiguously resolved into bytes
B. Random or garbage data added to the content of the frame, typically caused by a hardware fault
C. A legal frame size, but an invalid CRC
D. None of the above
Answer: B

Q: 17 When inspecting frames from a capture, start with the Decode __________ window.
A. Hex
B. Objects tab
C. Detail
D. Summary
Answer: D

Q: 18 Which of the following is recommended as part of the troubleshooting methodology?
A. Use the Expert and Summary window first
B. Use the Detail window first
C. Use a top-down approach
D. Use the Hex window first
Answer: A

Q: 19 If you are baselining the time it takes to download a 2 MB file, which of the following display options would help you determine the total download time?
A. Relative time
B. Status column
C. Delta time
D. Absolute time
Answer: A

Q: 20 The Decode Summary window will __________
A. Display only Application layer protocols
B. Provide an overview of the captured frames
C. Only display legal size frames
D. Display runt or legal size frames but not oversize frames
Answer: B

Q: 21 If a switch receives an incoming frame and doesn't know where the destination address is, it will:
A. Use DNS to resolve the name
B. Send the frame to default VLAN 1
C. ARP for the IP address and see what port to associate with the reply
D. Send the frame out all ports
Answer: D

Q: 22 This is the network map.

If a Sniffer Network Analyzer captured a frame at point A going from User to a server somewhere on the Internet, that frame would contain: (Choose all that apply.)
A. An IP destination address of 24.1.1.1
B. An IP destination address of the server
C. A DLC destination address of Cisco 36CD65
D. A DLC source address of Cisco 36CD65
E. An IP source address of 192.168.1.101
Answer: B, D, E

Q: 23 This is an image from the Summary window.

Based on what we see in this capture, which of the following statements is true?
A. Runtop131A97 initially did not know the IP address for 192.168.1.1
B. Runtop131A97 should not ARP but send directly to 192.168.1.1
C. LnksysE3D36B is the client
D. LnksysE3D36B is the MAC address for 192.168.1.1
Answer: D

Q: 24 This is a screen from the Detail window.

The following statements are true for this capture: (Choose all that apply.)
A. 192.168.1.101 is replying to 192.168.1.1 in this frame
B. 192.168.1.1 sent the initial ARP command frame
C. 192.168.1.101 sent the initial ARP command frame
D. 0001038BEB84 was initially the unknown hardware address
E. 00045AE3D36B was initially the unknown hardware address
Answer: C, E

Q: 25 Which of the following passive devices can be used to attach a Sniffer to the network?
A. Taps
B. Routers
C. Switches
D. All of the above
Answer: A

Q: 26 This is a screen of the Summary window and Detail windows for two frames.

Which of the following statements is true for this sequence of frames?
A. 10.112.1.238 should have responded in frame 4
B. 10.112.2.104 is retransmitting the same frame
C. These frames are being sent from the same MAC address
D. Frame 3 is sent to a router and in frame 4 that same router sends back to the same subnet
Answer: D

Q: 27 This is the network map for this question.

If User is complaining of slow response from Server, what should you do first?
A. Capture at A, C, and D
B. Capture at C and D
C. Capture at A, B, C, and D
D. Capture at B and compare to the baseline
Answer: D

Q: 28 This is a screen from the Summary window.

The following statement is true for this capture:
A. 192.168.0.1 initiated a ping
B. 192.168.0.26 initiated a ping
C. 192.168.0.26 has a MAC address of 001111195130
D. 192.168.0.1 should not repeat the ICMP: Echo
Answer: A

Q: 29 This is an image from the Summary window.

Based on what we see in this capture, which of the following statements is true?
A. 128.522.46.33 is the server
B. 128.52.46.33 is the router
C. 137.28.108.11 is the server
Answer: A

Q: 30 This is a screen from the Objects detail.

Which of the following statements is true for this Object detail screen?
A. This is the detail for a Duplicate IP Address alarm
B. This is the detail for a Local Routing alarm
C. KinetxA14015 is a probable router?.
D. This is the detail for a Window Exceeded alarm
Answer: B